Woodworking engraving machine tool wear

Issuing time:2019-12-30 00:00

Used in woodworking engraving machine, some customers reflect the cutter tool wear in use process problems. So how to reduce the woodworking engraving machine tool wear, increase the service life of cutting tools, in addition to solve these problems, today also help you to sort out the cautions of woodworking engraving machine tool of choose and buy.



A, woodworking carving machine tool wear




The main reason affecting the woodworking carving machine tool wear are the following:




1, cutting dosage: including spindle speed, feed rate, way spacing, turning parameters such as depth.




2, cutting tool material cutting tool type toinclude: on the depth of processing and its Angle, material to choose the appropriate tool




3, the feeding direction: sculpture program design and the use of the tool must be related.




4, the knife way: according to the material must choose the right direction of the knife.




5, cutting fluid, auxiliary engraving to must be appropriate.




Second, woodworking carving machine tool wear




1, according to the carving machine motions in the process of identifying tool wear condition, such as the processing parameters, cutting parameter Settings are reasonable, such as processing of engraving machine vibration is very big, and issued a "buzzing" sound, at this time can certainly tool has reached the sharp wear running state, must immediately change the cutting tool.




2, woodworking carving machine tool can wear, the wear quantity, the size of the main direct discriminant method is to "hear" sound, if cutting sound very "heavy" or a "sharp" screaming voice, shows that cutting tool machining status is not normal, can stop processing at this time, and to the point, if the cleaning tool itself quality problem, tool clamping problem, problem of parameters with the knife, the discriminant is certainly will prove and tool wear, so you have to suspend processing, change the cutting tool.




Third, prolong the service life of woodworking engraving machine tool




In woodworking engraving machine tool wear and cutting knife is inevitable, how to prolong the service life of cutting tools! Changsha new leaves nc equipment manufacturing co., LTD., summarizes the following:



1, choose the appropriate tool: sculpture high hardness materials with corresponding knives, otherwise it is easy to broken sword.




2, tool maintenance, is processed the cutting tool must be properly kept, prepare for next time use knives. When employees work, be sure to separate the cutting tools and materials.




3, in the process of carving, broken inside the material tool to take out in time, because when we carved again, lest burin met short sword above broken again.




4, carving speed: in sculpture high hardness material, don't speed too fast.




Four considerations, choice of woodworking engraving machine tools




1, according to the complexity of cutting tools, manufacturing, and sharpen cost to choose: complex and high precision tool life should choose better than single blade cutter. For knife, tool change and tool setting more complex of the combined knife engraving machine, engraving machine and automatic processing cutting tool, cutting tool life persons to be higher, especially should guarantee the cutting tool reliability.




2, when a procedure in the workshop productivity significantly restrict the whole workshop productivity rises, the working procedure of tool life is selected to lower; When a process unit time by spending large share to the plant, at the same time, the knives' service life also persons to be lower.




3, big finish machining, to ensure to complete at least one feeding, avoid midway in the knife, the cutting tool life should press parts to determine the accuracy and surface roughness.






2, woodworking carving machine tool can wear, the wear quantity, the size of the main direct discriminant method is to "hear" sound, if cutting sound very "heavy" or a "sharp" screaming voice, shows that cutting tool machining status is not normal, can stop processing at this time, and to the point, if the cleaning tool itself quality problem, tool clamping problem, problem of parameters with the knife, the discriminant is certainly will prove and tool wear, so you have to suspend processing, change the cutting tool.




Third, prolong the service life of woodworking engraving machine tool




In woodworking engraving machine tool wear and cutting knife is inevitable, how to prolong the service life of cutting tools! Changsha new leaves nc equipment manufacturing co., LTD., summarizes the following:


Share to: